Welcome to Kool Import Offroad! This is a place where we can all share a common love for the sport of offroading. All imported makes and models are welcome and encouraged at Kool Import Offroad. So get
in, sit down, and enjoy the ride!!
March 18, 2010, 09:51:50 pm by BLZUKI Views: 3739 | Comments: 202
As many of you know I'm swapping in Dana 44's... So i figured id do a build up thread here....
My axles are from a 78 Scout II they are not the easiest Dana's to swap in to a samurai.. first thing is if your running leaf springs you have to outboard your spring mounts on the front 1.5" on each side, I did that and made some new mounts and reused some... then after all that i had to come up with a mount for the passanger side of the diff... and i decided to copy the way you would mount a Toyota axle... I had some old spring plates but they wouldn't work so i had to make some new ones out of some 1/4 plate i had... Now once i get all that figured out i have to take the front axle back out and cut the outer C's because scout axles come with 0* Castor from the factory... I'm going to post some pics of what i did and still working on... so in the future if anybody needs some ideas they will be able to see some pics cause i spent lots of hours trying to find some pics ...
February 22, 2010, 08:19:06 pm by toyznjeeps | Views: 1602 | Comments: 59
This is what I had to work with, most of the zuki stuff was bought, begged,borrowed, or gratuitous, courtesy of NoLimitZuk and Andy. Working on it a little at a time.